------------------------------------------------------------------------------
           RemoteControlTool for CurveTracer Ver 5.01
                         Readme
                                                                   Apl/27/2017
                                                      IWATSU ELECTRIC CO.,LTD.
------------------------------------------------------------------------------

- GENERAL
  RemoteControlTool for CS-3000 (hereinafter referred to as "this software") is the application software which control CurveTracer CS-3000 series/ CS-5000 series by LAN interface from remote and runs on the Windows PC.
  This software has following functions.

      - Getting measurement data of waveform which CurveTracer is displaying currently, in CSV format.
      - Getting / Recalling CurveTracer's setup.
      - Capturing CurveTracer's screen shot.
      - Sending remote command / Receiving remote response

   In order to execute this software CurveTracer has firmware version 1.14 (or later).

- REQUIRED ENVIRONMENT
  OS       : Microsoft Windows 7/8/8.1/10
  Platform : Microsoft .Net Framework 4.0 (or later)
  Excel(*) : Microsoft Excel 2007 (or later)
  (* It will be required only if you want to export logfile to Excel format.)

- FOLDERs / FILEs
  Please unzip the file downloaded from our homepage.
  
  \
  + readme_e.txt -------------- RemoteCOntrolTool Readme text (English - this document) 
  + Setup_en.exe -------------- Installer for this software.
  + Installer_en.msi----------- MSI file for installer.
  + NI-VISAruntime -------- Installer for NI-VISA driver runtime edition.

- INSTALL
  Run the Setup_en.exe file, and follow the installation wizard.

  This software based on National Instruments Measurement Studio, and uses NI-VISA driver software.
  If NI-VISA driver software hadn't been installed on your PC, select NI-VISAruntime at the selection screen.

- UNINSTALL
  Launch Windows Control panel, and then launch "Add or Remove Programs".
  In the "Currently installed programs" box, select this software, and then click "Remove".

- PROPRIETARY RIGHTS / LICENSE AGREEMENT / GUARANTEES AND DISCLAIMERS
  You may not:
  *Reverse engineer,decompile,or disassemble this software
  *Distribute in whole or part, modify, or create derivatives of the SOFTWARE or distribute applications created with this software

  This software is free software.
  Our company doesn't assume the responsibility to the damage caused by having used this software at all. 

  Any rights or copyrights related to this software (including images, photographs, animations, videos, sound, music, and text), included manuals and documents, and any software reproductions belong to the company or licensee, and are protected by the provisions of the Copyright Law of Japan and international treaties.
  (c) 2011 IWATSU ELECTRIC CO.,LTD. All Rights Reserved.

  This software based on National Instruments Measurement Studio.
  (c) 2003 National Instruments Corporation. All Rights Reserved.

  About this, please carefully read this file and the attached file "NIReleasedLicenseAgreement".